Shop2Shore Corrosion Prevention on Vancouver Island
Automotive Sales Co. Ltd. is a proud supplier of Ship 2 Shore's exceptional Corrosion Preventive Coatings.
The Longest-Lasting Corrosion Protection
Ultimate in Moisture and Corrosion Protection
Ship-2-Shore PLID and Industrial films are high performance dielectric (40.000v), and anti-corrosion penetrant, anti-seize and lubricant coatings that cure to form a dynamic, non-hardening, dripless, and self-healing film that:
Displaces/ repels moisture -waterproofs-can be applied to damp surfaces
Not a sealant -contains NO wax, tar, lanolin or silicone
Adheres like a magnet to steel -stopping rust, corrosion and electrolysis 100%
Cures to a clear finish in 24-48 hours
Non-hazardous, non-flammable, non-toxic, and approved for food processing facilities and equipment! Cleans up with soap and water.
Ship-2-Shore PLID and Industrial are used in the marine industry Pacific Northwest coast of North America protecting marine electronics, vessels, barges, and deck equipment from the extreme coastal conditions they are constantly barraged with.
As well as marine use, have a look at how their other customers have found it helpful:
Our customers have found Ship-2-Shore wet films to be effective on marine electronics, circuit boards, lighting, electrical, connectors, switches, wires, motors, tools, machinery, insulated pipe, steel, stainless steel, aluminum, copper, iron, brass fasteners, nuts, bolts, welds, seams, cracks, corners, crevices, voids, cofferdams, and use Ship-2-Shore on workboats, ships, barges, deck equipment, fish boats, naval vessels, coast guard vessels, navigation markers, marinas, fork lifts, trucks, wire rigging, anchor chain, chain winch and locker, bilge, keel, rudder, drive shaft tunnel, voids in double hull vessels, cofferdams on off-shore structures.
We have customers that use Ship-2-Shore film as an effective rust inhibitor undercoat for cars, trucks, trailers, transport trucks and trailers, heavy equipment and RVs, it's also used widely in agriculture to prevent corrosion on electrical connectors, switches, control panels, wires and mechanical systems on tractors, tillage, planting, harvest and processing equipment, and on high voltage irrigation electrical panels, connectors, wires and switches.
Ship-2-Shore PLID Thin Film
Ship-2-Shore's "Thin Film" is highly penetrative, dielectric corrosion resistant coating, with exceptional adhesion - acts like a "magnet to steel." This excellent high-pressure lubricant stops corrosion and shuts down electrolysis between dissimilar metals -dielectric 40.000 volts- non-conductive. It is non-hazardous, non-flammable, non-toxic, and does not attract dust or dirt. With low VOCs, it is Industry Canada, Navy, and Coast Guard approved!
Ideal for all electrical, motors, machinery, etc.
Product is available in aerosol spray and bulk liquid sizes.
Ship-2-Shore Industrial Thick Film
Ship-2-Shore's "Thick Film" is their long-lasting, heavy-duty, dielectric and anti-corrosion coating. With its exceptional adhesion, it forms a shield against salt water and other corrosive environments, resisting splash, spray, and complete submersion. As with Ship-2-Shore's "Thin Film", it shuts down corrosion and electrolysis 100% -dielectric 40.000 volts, and is non-hazardous, non-flammable, and non-toxic. It also does not attract dust or dirt.
With low VOCs, it is safe for electrical, electronics, and control boards. It is ideal for vessels, anchor chain, wire rope & cable, agriculture, heavy equipment, off-shore structures, industrial, mining, vehicle rust prevention undercoating, and many other uses.
Available in convenient 150ml bottles with brush or is also available in bulk sizes.
PLID Wrap
PLID WRAP is a wax tape infused with S2S HD, their strongest, longest-lasting formula.
PLID WRAP is perfect for pipes and flanges.
It can also be used to line tanks and subfloors under ship decking and other corrosive areas. PLID WRAP can even be used as patches on flat metal for difficult areas.
PLID wrap will polar bond on sidewalls and ceilings and will not slide off.
Use PLID wrap between dissimilar metals to prevent premature corrosion.
PLID WRAP can be used as a highly effective stand-alone product or in highly corrosive areas, surfaces can be primed with S2S wet films to further increase longevity.
PLID WRAP can be topped with a thick black vinyl wrap or a clear paintable wrap for a dry contact surface for added protection on exposed or buried pipes.
